Filter
Top Products
Note: It is possible to answer or reject incoming calls while the
keypad is locked. If configured in the WinPDM or CPDM, it is
also possible to make an emergency call while the keypad is
locked.
15.4.2 Activating Manual Key Lock
It is recommended to always have the automatic lock on, but it is possible
to manually lock and unlock the keypad as well. To lock the keypad
manually:
1. Press
.
2. Press Lock.
The
indicates that the keypad is locked.
Note: It is possible to answer or reject incoming calls while the
keypad is locked. If configured in the WinPDM or CPDM, it is
also possible to make an emergency call while the keypad is
locked.
15.4.2.1 Unlock
To unlock the keypad, do the following:
1. Press
.
2. Press Yes.
15.4.3 Activating Phone Lock
Activating Phone lock will protect the phone from unauthorized use. When
this function is activated, the PIN code has to be entered at power on.
When activating Phone lock the PIN code that must be entered. The PIN
code is by default (0000) but it can be changed to any 4-8 digit code, see
Section 15.4.5.
To activate the phone lock, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Locks and press Select.
3. Mark Phone lock and press Select.
4. Mark Auto phone lock and press Select.
5. Mark On, or On in charger, and press Select.
6. Enter PIN code, and press OK.
7. Press Back to save the settings.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
75