Filter
Top Products
2. is displayed.
This means that the other part in an ongoing call with you will not
here you.
To switch the microphone back on, do the following:
1. Press More, select Microphone on, and press Select.
It is also possible to switch on and off the microphone during a call by
pressing and holding
.
Note: It is advised to use this feature instead of putting a call on hold. A
call on hold can be diverted to your operator, directly or after some
time.
9.4 Open Contacts During Call
It is possible to open Contacts, and to search for a contact in the local,
company and central phonebook during a call.
Do the following:
1. Press More.
2. Select Contacts, and press Select.
a. Select Call contact and press Select to select a contact in the local
or company phonebook.
OR
b. Select Central Phonebook and press Select to search for a contact
in the central phonebook.
Note: It is only possible to search for, view and edit a contact when
following the above procedure during a call. For information on
how to initiate a call to another contact during an ongoing call, see
Section 9.5.
9.5 Inquiry
An inquiry is made when having an ongoing conversation and wanting to
make an inquiry to an internal or external party.
Note: This feature needs to be configured in the WinPDM or CPDM.
Please contact your system administrator.
To make an inquiry, do the following:
1. Press More during the call.
2. Select New call and press Select.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
49