Filter
Top Products
When the phone is locked, is shown in the display.
Note: If configured in the WinPDM or CPDM, it is also possible to make
an emergency call while the phone is locked.
If PIN code is lost it is possible to configure a new, or to do a
factory reset in WinPDM or CPDM, contact your system
administrator.
15.4.4 Deactivating Phone Lock
To deactivate the Phone lock function, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Locks and press Select.
3. Mark Phone lock and press Select.
4. Mark Auto phone lock and press Select.
5. Select Off, and press Select.
6. Enter PIN code, press OK.
7. Press Back to save the setting.
15.4.5 Changing PIN Code
To change PIN code, do the following:
1. Press Menu, select Settings, and press Settings.
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Change PIN code and press Select.
5. Enter old PIN code (default is 0000) and press OK.
6. Enter new PIN code.
7. Confirm the new PIN code and press Save.
The following message is displayed: New PIN code saved.
15.5 Changing Owner ID
The Owner ID is set to identify the phone. To change the owner ID, do the
following:
1. Press Menu, select Settings, and press Select.
1424_EN_LZT103087.doc Rev B2 2009-09-11
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
76