Filter
Top Products
5
Checking your telephone
When you first plug in your 9516CW, the telephone initializes itself and then you may see
a message asking you to make a language selection. Follow the directions on the display to
select a language.
Your telephone also runs a test to ensure that the line cord is connected properly. If the test
fails, the display prompts you to check the line cord. Make sure that all connections are
fastened securely.
Note:
The Ringer Equivalence Number (REN) is 1.4B for the 9516CW telephone. Please see the
base of your telephone or the Regulations sheet for more regulatory and safety information.
Desk Mounting
Lower the stand into the slots on the base
of the telephone, as shown above.
Slide the stand back until it clicks into the
locked position.
Optional Wall Mounting
†
Lower the stand into the slots on the base
of the telephone, as shown above.
†
We recommend that you use a wall mounting plate which is available through your telephone company. If you are going to wall
mount your 9516CW, use the 20 cm (8”) line cord supplied with your telephone.
Slide the stand back until it clicks into the
locked position.
Adjusting the Display
Place your 9516CW on a table or hang it
on a wall, then adjust the display.
The Set Options Key
Move the sliding panel over to the right to
reveal the Set Options key.