Filter
Top Products
42
Saving a feature and light to memory keys
You can make the set indicator light come on when you turn a feature on and go off when
you turn that same feature off. You can only do this with one feature, and the feature must
have separate On and Off codes (such as Call Forwarding).
For example, you may want the light to remind you that you have turned Call Forwarding
on. To do this, use one key to turn the indicator light on when you activate the feature. Use
the second key to turn the indicator light off when you deactivate that same feature. The
following procedure shows you how to program a Feature Light On and Off key.
Using Feature Light keys
Note : If the Live dial pad option is turned on, you do not have to lift the handset or press
any other button. Pressing the memory key will automatically dial the feature code
and put the telephone in Handsfree mode.
To save a FeatureLight On key: To save a FeatureLight Off key:
1. Press
ß. Do NOT select a
memory key yet.
1. Press ß. Do NOT select a
memory key yet.
2. To program the light on, press
⁄. 2. To program the light off, press ‚.
3. Press the desired memory key.
Note: If you attempt to save to a
memory key that already contains an
entry, the message,
appears. You must
first delete the old entry before saving
a new one. See
Deleting mem-
ory keys on page 40 for more infor-
mation.
3. Press the desired memory key.
Note: If you attempt to save to a
memory key that already contains an
entry, the message,
appears. You must
first delete the old entry before saving
a new one. See
Deleting mem-
ory keys on page 40 for more infor-
mation.
4. Enter the telephone company feature
code for turning the feature on.
†
†
Note: Contact your telephone company for the appropriate feature codes.
4. Enter the telephone company feature
code for turning the feature off.
†
5. Press ß. 5. Press ß.
6. Read the display to confirm the num-
ber.
6. Read the display to confirm the num-
ber.
7. Label the memory key.
See the diagram on page 38.
7. Label the memory key.
See the diagram on page 38.
To turn a feature and its light on or off:
1. Press the memory key where you stored the FeatureLight.
The display shows
or .
2. Lift the handset or press either
©or ∂.
The feature and light turn on or off. (When the feature and light are on and you are
not using the telephone, the display shows
as a reminder).