Filter
Top Products
41
Saving features in memory keys
†
For easy access, you can save the feature codes of telephone company services in your
memory keys. This works well with network features such as Call Forwarding, Call Wait-
ing and Call Return. Some features require an On and Off code in two separate keys, while
other features are stored in only one key. The following procedures show you how to save
both On and Off codes.
†
Note: Contact your local telephone company for the appropriate feature codes.
Using feature keys
When a memory key is programmed with a feature code, you can use the memory key to
activate or deactivate the feature.
Note : If the Live dial pad option is turned on, you do not have to lift the handset or press
any other button. Pressing the memory key will automatically dial the feature code
and put the telephone in Handsfree mode.
†
You must subscribe to your telephone company for Custom Calling Features.
To save a feature On code: To save a feature Off code:
1. Press
ß. 1. Press ß.
2. Press the desired memory key.
Note: If you attempt to save to a
memory key that already contains an
entry, the message,
appears. You must
first delete the old entry before saving
a new one. See
Deleting memory
keys on page 40.
2. Press the desired memory key.
Note: If you attempt to save to a
memory key that already contains an
entry, the message,
appears. You must
first delete the old entry before saving
a new one. See
Deleting memory
keys on page 40.
3. Enter the telephone company feature
code for turning the feature on.
†
Read
the display to confirm the number.
3. Enter the telephone company feature
code for turning the feature off.
†
Read
the display to confirm the number.
4. Press
ß again. 4. Press ß again.
5. Enter the feature name using the dial
pad. See Entering Names on
page 22.
5. Enter the feature name using the dial
pad. See Entering Names on
page 22.
6. Press
ß three times to save the
name and skip the mailbox and voice
tag prompts.
6. Press ß three times to save the
name and skip the mailbox and voice
tag prompts.
7. Label the memory key. See the dia-
gram on page 38.
7. Label the memory key. See the dia-
gram on page 38.
To turn a feature on or off:
1. Press the memory key where you stored the desired feature. The display shows the
feature name and code.
2. Lift the handset or press either
© or ∂.
The feature code is dialed out, which turns the feature on or off.