Filter
Top Products
58
General display messages
Message What it means
If there is no dial tone, make sure the line cord and handset
cord are attached securely.
The transfer of Directory information from one 9516CW to
another 9516CW has begun.
The transfer of Directory information has been aborted.
The number you have entered cannot be dialed because it
has been entered into the Dialing Restrictions feature.
The Directory remains empty until you add numbers and
names to it.
The Directory has a 75 entry limit. If you want to add an item,
delete an item you no longer use.
An extension telephone is using the same line that you want
to use. Wait until the message disappears before making
your call.
The FeatureLight On key has been pressed and the code
dialed out. To turn off the feature and the light, press the Fea-
tureLight Off key and lift the handset or press either
©or ∂.
The call is forwarded from another telephone.
The memory key is factory-programmed and cannot be
erased or reprogrammed. Program a different memory key.
The caller is calling from outside your local area. Long dis-
tance dialing is required to return the call.
Your Voice Mail service has received a call for you. To sub-
scribe to voice mail service contact your telephone company.
or
The caller has requested that the telephone company not
deliver the number or name.
This appears if you press µ before making any calls
on your telephone or if power has been interrupted.
The ringer volume is turned off. To turn the ringer on; without
lifting the handset, press the right side of the volume bar.
or
The name or number is unavailable from the telephone com-
pany.
The telephone number is longer than the display. The display
shows
and 14 or 15 digits of the number depending on
whether the phone is on or off hook.
Indicates an incoming call.
Indicates that the telephone is off hook.