Filter
Top Products
9
SuperFlash
†
The SuperFlash feature allows either of two telephone extensions to activate the link to a
Call Waiting call. When a person at either extension presses ˚ both extensions
switch to and speak with the Call Waiting caller as shown in the diagrams below.
Calls will not be disconnected when you press ˚. If you wish to return to your first
caller press ˚ again. The 9516CW and one other Aastra SuperFlash-compatible tele-
phone extension will switch between the two callers each time you press ˚. Once
you have switched to one caller by pressing ˚, you must wait three seconds before
you can switch back to the previous caller. When you press ˚ and see a caller’s
Identification information but only hear a dial tone, it means that the caller has hung up.
To end a call, ensure you can see that call’s identification information (you may have to
press ˚), then press ®.
Note: SuperFlash and Super Call Waiting Identification only work with Aastra SuperFlash and
Super Call Waiting Identification-compatible telephones.
†
You must subscribe to your telephone company for the Call Waiting with Calling Line Identification service.
Incoming caller's information
(Caller One) is displayed.
Extension telephone picks up
and also speaks with Caller One.
Extension
Call Waiting tone sounds and Caller Two's
information is displayed on both extensions.
Extension
Either telephone can press ˚
to speakwith Caller Two.
Both telephones speak to Caller Two
and see the displayed information.
Either telephone can press ˚ again
to switch back to Caller One.