Filter
Top Products
Model 57i CT IP Phone User Guide 51
Softkeys
Using the Park Call/Pickup Parked Call Feature
Use the following procedure on the IP phones to park a call and pick up a
parked call.
Park a Call
1. While on a live call, press the "Park" softkey.
2. Perform the following for your specific server:
If the call is parked successfully, the response is either a greeting voice
confirming that the call was parked, or a hang up occurs. The parked call
party will get music on hold.
3. If the call fails, you can pick up the call (using the next procedure) and
press the "Park" softkey again to retry step 2.
Pickup a Parked Call
1. Pick up the handset on the phone.
2. Enter the extension number where the call was parked.
3. Press the "Pickup" softkey.
If the call pick up is successful, you are connected with the parked call.
For Asterisk Server
- Server announces the extension
number where the call has been
parked. Once the call is parked,
press the y key to complete
parking.
For BroadWorks Server
- After you hear the greeting from
the CallPark server, enter the
extension where you want to park
the call.
For Sylnatro Server
- Enter the extension number where
you want to park the call, followed
by "#" key.
For ININ Server
- Enter the extension number where
you want to park the call, followed
by "#" key.