Filter
Top Products
Model 57i CT IP Phone User Guide 49
Softkeys
• specify a customized label to display on the Phone UI
•specify a value
• specify which line to use
• specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
• When a call comes in, and you pickup the handset, the custom label that
you configured for the Park softkey displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup soft-
key displays on other phones in the network. You can then press the
"Pickup" softkey, followed by the applicable value to pickup the call on
another phone in your network.
You can configure a Park and Pickup programmable configuration using
the Aastra Web UI.
Softkey Configuration Using the Aastra Web UI
On the 57i CT, you configure a Park and/or Pickup key at Operation-
>Softkeys and XML. You enter a key label, and value for a specific line on
the phone. The default state of the Park configuration is "connected". The
default state of the Pickup configuration is "idle, outgoing".
Note: Applicable values depend on the server in your network (Asterisk, Broad-
Works, Sylantro, ININ PBX. See the table "Park/Pickup Call Server Configu-
ration Values" on page 47.
Configuring Park/Pickup using Softkey Configuration
Use the following procedure to configure the Park/Pickup call feature
using the softkey configuration method.
1. Click on Operation->Softkeys and XML.
Aastra Web UI