Filter
Top Products
Model 57i CT IP Phone User Guide 101
Using Your 57i CT Cordless Handset
Custom name
Custom name allows the user to personalize the name/label for the
cordless handset. In a multi-handset environment, this is an ideal option to
personalize each handset to its user or extension number.
1. Press Â.
2. Navigate to Custom Name or press 4.
3.Press the Change softkey.
4.Press the Edit softkey. If a custom name already exists, the Delete softkey
will be presented.
5.Using the keypad, type out a new label or use the scroll keys Ï and  to
move the cursor to the desired display position or to erase text.
6.The ChCase softkey is available to toggle between upper and lower case
text entry.
7.Press the Save softkey to save the name.
8.Press the Goodbye
y key to return to the main idle screen.
Note: In editing mode, the Volume Bar can be used in place of the Ï and  keys to
control the screen cursor. Pressing the Lower end volume bar for Backspace/
Erase; and pressing the Higher end volume bar to add a Space.
Call timer
When the call timer is enabled, the timer starts from the first call and
continues until all calls have been released.
Note: The call timer is not usable for call accounting since the timer continues to
increment even when the call is on hold.
Vibrate
The Vibrate option allows the handset to signal an incoming call by
vibrating as well as ringing. By default, this option is always Off.
• To enable this feature, press the Change softkey and the display will
indicate "Vibrate On" and "-confirmed-" and will quickly return to the
previous menu display.
• Once the Vibrate is On, p icon is shown beside the ringer icon on the
top right line of the display.
•Pressing the
y key will return you to the main idle display screen.
Handset Pairing
All handsets must be paired to a 57i CT base before it can be used. Please
refer to the section entitled 115.
IP Phone UI