Filter
Top Products
38 Model 57i CT IP Phone User Guide
Softkeys
Softkeys as BLF List
(For use with the BroadSoft Broadworks Rel 13 or higher platform only)
You can set a softkey to BLF list.
The BLF list feature on the IP phones is specifically designed to support the
BroadSoft Broadworks Rel 13 Busy Lamp Field feature. This feature allows
the IP phone to subscribe to a list of monitored users defined through the
BroadWorks web portal.
Note: Your system administrator must have BLF List enabled on the BroadWorks
Server. Contact your system administrator for more information.
In addition to monitoring the idle and busy state, the BLF list feature also
supports the ringing state. When the monitored user is idle, there is a
small telephone icon shown with the handset on-hook. When the
monitored user is on an active call then a small telephone icon is shown
with the handset off-hook.
Note: You can also use a BLF/List configured key to dial out.
Example
A receptionist has a 57i CT running Broadsoft firmware that subscribes to a
list of extensions from the BroadWorks Application Server. On the 57i CT,
the softkey LEDs illuminate either flashing, solid, or turn off depending on
the state of those extensions.
Note: The Broadworks BLF feature is not the same as the Broadworks Shared Call
Appearance (SCA) feature and does not permit call control over the moni-
tored extension.
Setting a BLF List Softkey
The BLF List functions can be configured on the 57i CT using the Aastra
Web UI only. If you set a softkey to use BLF/List, you must also enter a BLF
List URI at Operation->Softkeys and XML->Services. The BLF List URI is
the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp
field page for your particular user. For example, my480i-blf-
list@as.broadworks.com. The value of the BLF\List URI parameter must
match the list name configured. Otherwise, no values display on the 57i CT
screen and the feature is disabled.