Filter
Top Products
24 Model 57i CT IP Phone User Guide
Softkeys
Softkeys
Your 57i CT has 12 multi-functional softkeys:
• 6 Top Keys: programmable static softkeys
(up to 10 programmable functions)
• 6 Bottom Keys: programmable state-based softkeys
(up to 20 programmable functions).
Note: If 536 or 560 Expansion Module(s) are attached to the phone, click on
Operation->Expansion Keys to access and configure up to 36 softkeys on each
536EM and up to 60 softkeys on each 560EM. (Phone allows up to 3 expansion
modules totaling up to 108 additional softkeys on the 536EM and up to 180
softkeys on the 560EM). These keys allow you to configure BLF, Speeddial,
and Shared Call Appearance functions only. For more information about
expansion modules, see "Model 536 and 560 Expansion Modules"on page 141.
You can program these softkeys for call handling and extension
management of the SIP system. The softkey menus on the IP phone UI
change depending on the phone’s state, displaying relevant softkeys only.
Note: The softkey functions outlined in this section represent the default arrange-
ment of softkeys on the 57i CT IP phone. Only the bottom softkeys are state-
based.
The 57i CT default softkeys are shown in the following illustration.
Top Softkeys
Bottom Softkeys