Filter
Top Products
Model 57i CT IP Phone User Guide 45
Softkeys
Softkeys as Sprecode
You can set a softkey to automatically activate specific services offered by
the server by setting a softkey to "sprecode". For example, if the sprecode
value of *82 is configured, then by pressing the softkey, *82 automatically
activates a service provided by the server. The value you enter for this field
is dependent on the services provided by the server. Contact your system
administrator for information about available services.
Setting a Sprecode Softkey
Use the following procedure to configure a sprecode softkey on the 57i CT
phone.
1. Click on Operation->Softkeys and XML.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab..
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select Sprecode.
5. In the "Label" field, enter a label to display on the IP phone for this soft-
key.
6. In the "Value" field, enter the appropriate value for accessing specific
services from the server.
Note: For values to enter in this field, contact your system administrator.
Aastra Web UI