3Com 900-0208 Telephone User Manual


 
96 CHAPTER 6: GETTING MORE FROM YOUR TELEPHONE SYSTEM
When the light is lit on your telephone, you can press the MWI Retrieve
button, scroll through your display panel to see the caller ID, and return
the call. When you press the MWI Retrieve button, you turn off the MWI
light. You may still have one or more calls in a list to return.
To retrieve an MWI number:
1 Pick up the handset and press the MWI Retrieve access button. The
display panel shows the total number of MWI messages and the number
of new MWI messages on your list.
2 Scroll down the display panel to see the extension for the most recent
MWI sender. The most recent call is at the top of the list.
3 Press the Call soft button to call the sender.
You can also retrieve an MWI message with Feature + 414.
Deleting MWI
Messages
Press the MWI Retrieve button to turn off the MWI light until you receive
another MWI message. It does not delete the MWI message. Messages
remain in your list until you explicitly delete them or until the NBX system
is rebooted. Your telephone can store a maximum of 30 MWI messages.
When it is full, it will reject new messages, so be sure to delete unneeded
messages.
To delete all MWI messages:
1 Press the MWI Retrieve access button. The display panel shows how many
MWI messages are on your list.
2 Press the Delete soft button.
3 The display panel asks you to confirm the delete of the whole MWI list.
Press the Yes soft button.
To delete a single MWI message:
1 Press the MWI Retrieve access button. The display panel shows how many
MWI messages are on your list.
2 Scroll down the display panel to see the MWI message you want to
delete.
3 Press the Delete soft button.
4 The display panel asks you to confirm the delete of the entry. Press the
Yes soft button.