Filter
Top Products
92 CHAPTER 6: GETTING MORE FROM YOUR TELEPHONE SYSTEM
Paging the System When you page the system, you broadcast a message to all internal
extensions with speakers, to a Public Address (PA) system, or to both
simultaneously. Paging codes, as described in Table 8
, have default values
for each destination.
To page, perform the following steps using your 3Com Telephone:
1 Pick up the handset.
2 Dial the appropriate paging code on your system.
3 Speak the broadcast message into your handset and hang up.
Paging Zones A page zone is a subset of internal extensions to which you can direct a
broadcast using a configured extension. You can page a zone, a P.A.
system, or both the zone and the P.A. system simultaneously. Zone
extensions are configured by the administrator.
To discover the page zone extensions on your system:
1 Log in to NBX NetSet > Personal Information > User Information >
Page Zones.
The NetSet utility lists the existing page zones and their extension
numbers.
2 Click Details to list the members of each zone.
Table 8 Paging Codes
Feature
3-digit dial plan
(default codes)
4-digit dial plan
(default codes)
External Paging
Broadcast an announcement over a
public address system that has a
paging amplifier and speaker system
that is connected to your NBX system
620 6200
Internal Paging
Broadcast an announcement through
the speakers on all NBX Telephones
with speakers on your system except
those that have been set to Do Not
Disturb.
621 6201
Simultaneous Paging
Broadcast an announcement externally
and internally at the same time.
622 6202