3Com 900-0208 Telephone User Manual


 
72 CHAPTER 5: PERSONALIZING YOUR TELEPHONE
When you use Class of Service (CoS) Override, any reports that are
generated on the NBX system indicate that the CoS features of your own
3Com Telephone were applied temporarily to the telephone on which
you made the call.
Using a Headset You can use a headset that has a microphone with any telephone on an
NBX system.
For how to connect and use a headset with the 3Com Manager’s
Telephone and 3102 Business Telephone, read the next section.
With the 3Com
Manager’s Telephone
and 3Com 3102
Business Telephone
The 3Com Manager’s Telephone and 3Com 3102 Business Telephone
have a headset jack located on the underside of the telephone on the left
side.
To prepare the headset for all calls on the 3Com Manager’s Telephone
and 3102 Business Telephone:
1 Plug the headset connector into the headset jack on the underside of the
telephone. See Figure 10
in Appendix A for the location of the jack.
2 Press the Headset button. By default on the 3Com Manager’s Telephone,
this is the top Access button.
3 Verify that the indicator light beside the Headset button turns on.
To answer a call when you are using the headset:
1 Put the headset on. When a call comes in, press the System Appearance
button beside the flashing light. You are connected to the call.
The handset can be either on hook or off hook.
2 To end a call when you are using the headset, press the Release button
on the telephone.
If the handset is off hook, press the System Appearance button beside
the flashing light.
On a 3Com Business Telephone or 3Com Manager’s Telephone, press
the Release button, depress the hook switch, or hang up the
handset.