Filter
Top Products
OMNI 37XX INSTALLATION GUIDE 9
CHAPTER 2
Terminal Setup
This chapter describes terminal setup procedure. You will learn how to:
• Select a location and protect the terminal from adverse Environmental
Factors. See Select Terminal Location.
• Unpack the shipping carton. See Unpack the Shipping Carton.
• Examine terminal features. See Examine Terminal Features.
• Establish telephone line connections. See Establish Telephone Line
Connections.
• Install paper roll in the printer. See Install Paper Roll.
• Configure optional peripheral devices. See Connect Optional Device(s).
• Establish power connections. See Connect Terminal Power Pack.
• Route cables using wire clips. See Routing The Cables Using Wire Clips.
• Conduct smart card, or credit/debit transactions. See Smart Card Transaction
and Magnetic Card Reader Use.
Select Terminal
Location
Follow the guidelines described in the following section while selecting a location
for your terminal.
Ease of Use • Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and a telephone/modem line connection.
For safety, do not string the power cable in a walkway or place across a
walkway on the floor.
Environmental
Factors
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
• Do not use the terminal outdoors.
CAUTION
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.