Filter
Top Products
TERMINAL SETUP
Install Paper Roll
OMNI 37XX INSTALLATION GUIDE 15
3 If there is a partial roll of paper in the printer tray, remove it by lifting it up (see
Figure 6).
Figure 6 Removing Partial Paper Roll
4 Loosen the glued leading edge of the paper, or remove the protective strip
from the new roll of paper and cut a straight edge across its leading end.
5 Hold the roll so the paper feeds from the bottom of the roll.
6 Drop the paper roll into the printer tray, leaving 7 centimeters (about two
inches) of paper sticking up past the serrated metal tear strip (see Figure 7).
Figure 7 Loading Paper Roll