Filter
Top Products
TERMINAL SETUP
Connect Terminal Power Pack
OMNI 37XX INSTALLATION GUIDE 21
Figure 14 Omni 37xx Power Pack Connection
• To lock the connector into the power port, align the plastic lock tab so it
points up. Insert the connector, then twist it to the left.
• To unlock the connector, twist it to the right.
2 Insert the power cable into the power pack.
3 Plug the power pack cable into a wall outlet or surge protector.
When the terminal has power, the LCD screen lights and the green LED indicator
flashes on and off if the printer has no paper, or stays lit if paper is loaded.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and displays a unique copyright screen. If no application is
loaded in the terminal,
DOWNLOAD NEEDED appears on screen after the initial
VeriFone copyright screen.
WARNING
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors. Also, disconnecting power during a transaction may cause transaction
data files that are not yet stored in terminal memory to be lost.
NOTE
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.