Filter
Top Products
TERMINAL SETUP
Examine Terminal Features
12 OMNI 37XX INSTALLATION GUIDE
• Slow flashing green (roughly one flash per second) indicates no paper in
the printer.
• Fast flashing green (roughly two flashes per second) indicates a printer
mechanism error.
• Flashing red indicates the terminal is downloading printer-related files.
• An internal thermal printer.
• A smart card reader, built into the terminal’s front side. The icon
shown at right indicates the proper card position and insertion
direction.
• A SAM (security access module) compartment, built into the bottom side of
the terminal. The Omni 37xx terminal contains micromodule-size SAM
(MSAM) cardholders for supporting multiple stored-value card programs or
other merchant card requirements.
Back Panel
If you turn the terminal around and view it from just under the hinges of the paper
roll cover, you will notice different ports that connect the Omni 37xx to a
communications line, optional devices, and the power supply (see Figure 3):
Figure 3 Connection Ports (Back Panel)
• Communications Port can be identified by a telephone-shaped
icon, shown at right. Use this port to connect a telephone to the
Omni 37xx.
NOTE
VeriFone ships variants of the Omni 37xx terminal for different markets. Your
terminal may have a different configuration. The following devices may or may not
be present: a smart card reader, a printer; and/or zero, two, or four SAM
cardholders. However, the basic processes described in this guide remains the
same, regardless of the terminal configuration.