Filter
Top Products
TERMINAL SETUP
Connect Terminal Power Pack
20 OMNI 37XX INSTALLATION GUIDE
Figure 13 CR 600 Check Reader Connection
External Printers
Supported
Although most Omni 37xx variants have an internal thermal printer, it may be
convenient to print larger print runs (for example, daily or weekly reports) to an
external printer. The Omni 37xx base supports three VeriFone external printers:
P250, P350, and P900. Contact your VeriFone representative or visit the online
store at www.verifone.com for information on these devices. External printer
connections are through the same port as check readers (see Figure 13).
Connect
Terminal Power
Pack
When you have finished connecting any optional peripheral(s), you are ready to
connect the Omni 37xx to a power source:
1 Insert the round barrel connector (see Figure 14) into the power port,
identified by the icon at right.
CAUTION
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before connecting check to ensure that the power supply
being used to power the terminal matches the requirements specified at the back
of the terminal. (see Chapter 3, Specifications, for detailed power supply
specifications). Obtain the appropriately rated power supply before continuing with
troubleshooting.
NOTE
The round barrel connector on the power pack cable has a plastic lock tab that
secures the power cable to the terminal.