Filter
Top Products
TERMINAL SETUP
Establish Telephone Line Connections
OMNI 37XX INSTALLATION GUIDE 13
• Two RJ45-type modular jacks (serial ports) are for attaching optional
peripheral devices.
• RS232 port, icon at right, connects a VeriFone CR 600 check
reader or other peripheral device.
• Bar Code and PIN Pad port, icons at right, connects a PIN pad,
smart card reader, or bar code wand.
• Power connection port that uses a round port with a lock notch for
securely connecting the terminal to a power source. It is identified by
the electrical power icon at right.
Establish
Telephone Line
Connections
Connect the telephone cord (VeriFone Part Number 00124-17) to the
communication port on the terminal then route it directly to a telephone wall jack
(see Figure 4). This is a direct connection, and the line is dedicated to the
terminal.
Figure 4 Direct Telephone Connection
Install Paper
Roll
A fast, quiet thermal printer is built in to the Omni 37xx. There are no additional
printer cables to connect because the printer receives power directly from the
terminal.
Before you can process transactions that require a receipt or record, you must
install a roll of thermal-sensitive paper in the printer. This procedure is described
in To Install a Paper Roll section.
WARNING
Do not connect the terminal to the power supply until all the peripherals are
attached.