Filter
Top Products
[ 54 ]
* To repeat a message, press # then 1 within about four seconds to repeat the previous
message, or press # then 1 after about four seconds to repeat the current message.
** For the Memo Record and Greeting Message Record functions, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop the
recording, enter the command again.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this time
from the chart above.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Remote access with the handset
You can operate your answering system from another room using a handset.
1) When the phone is in standby mode, press . on the handset. Remote
Answering Machine operation appears on the handset display. The answering
system announces the current time and the number of messages stored in the memory.
Messages will be played in the order in which they were received. The time and day
that each message was received is announced after the message is played.
2) You hear “To play incoming messages, press two. For help, press zero.”
You will hear a beep.
3) Enter a command within 30 seconds. You may select a command from the
following chart:
• When you receive a
call, the remote
operation is canceled.
• When another
handset or base make
a call, the remote
operation is
cancelled.
• During the remote
operation “—”
appears on the base.
• If you have new
messages and old
messages, only the
new messages will be
played. After you
have reviewed your
new messages, you
can play your old
messages by again
pressing 2.
UP354BH(WDECT2355+2) OM 5/14/04 10:52 AM Page 54