Filter
Top Products
[ 43 ]
Answering System Default Settings
Some answering system functions can be set through the base or handset.
Default settings for each function are as follows:
1) To turn the answering system on, press ans on/off when
the phone is in standby mode.
After the announcement “Answering System is on,” the
current greeting message will be played and you will hear a
confirmation tone. The message counter displays the number
of messages stored in memory. If the display flashes, then
there are new messages waiting for you.
2) To turn the answering system off, press ans on/off. After the announcement
“Answering System is off,” the message counter display will no longer be illuminated.
TURNING THE ANSWERING SYSTEM ON/OFF
Functions Default Setting
Reference Page
Base Handset
Answer On/Off On P. 43 -
Time SUN 12:00 AM* P. 46 P. 19 *To activate the clock and
Security Code 80 P. 46 P. 17 time stamp, you must
Ring Time 9 times P. 47 P. 18 setup the Time function.
Record Time 1 minute P. 47 P. 18
Message Alert Off P. 48 P. 18
Call Screen On P. 49 P. 18
UP354BH(WDECT2355+2) OM 5/14/04 10:52 AM Page 43