Filter
Top Products
[ 27 ]
TONE DIALING SWITCH-OVER (AUSTRALIA ONLY)
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing). If you need to
enter tone dialing digits, you can switch-over to tone dialing
during the call. This feature is useful when you need tone
dialing to use automated systems, for example, entering your
bank account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your
call connects, press (or on the base).
Enter the desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number
can be stored in a
memory location.
This is referred to as
Chain Dialing (see
page 37)
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base unit, noise
may increase. If you pass the range limits of the base unit, you will hear a beep and
see Out of Range on the display, and then the handset returns to standby mode.
You may return to the call if you move your handset within the range limits of the
base and press or speaker within 30 seconds.
If you encounter interference while using your phone, you can manually improve the
sound by setting the Clarity Booster to on. This works only when the phone is in use.
CLARITY BOOSTER
UP354BH(WDECT2355+2) OM 5/14/04 10:50 AM Page 27