Filter
Top Products
[ 45 ]
For your convenience,
voice prompts will
guide you through
the menu setup
mode.
1) When the phone is in standby mode, press /vol/ or /vol/ repeatedly to
scroll through ringer volumes. The ringer level is displayed, and you will hear each
volume level. The last ringer heard will be the volume setting, then the phone returns
to standby mode.
2) You can also set the base ringer volume while the phone is ringing by pressing the
/vol/ or /vol/ .
Adjusting the speaker volume level
When the base speaker is in use, press /vol/ or /vol/ on the base to adjust
the volume. Press /vol/ for louder or /vol/ for softer.
The number 1-10 appears on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.
Answering System Settings
To set the following six functions you must enter the
menu mode.
• To scroll through the menu options, repeatedly
press clock/MENU on the base in standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate
standby mode.
• When you have completed the setting, press
play/stop to exit the menu mode, or
clock/MENU to move to the next menu option.
• You can also set these menus from the handset.
See “Answering System Setup” on page 17
for instructions.
clock/MENU
clock/MENU
clock/MENU
clock/MENU
clock/MENU
clock/MENU
clock/MENU
"Time"
"Security Code"
"Ring Time"
"Record Time"
"Message Alert"
"Call Screening"
Return to Standby
UP354BH(WDECT2355+2) OM 5/14/04 10:52 AM Page 45