Uniden WDECT 2355+2 Cordless Telephone User Manual


 
The headsets is used to make or receive a call. With the headset, you can have the
convenience of hands free communication while using your cordless phone.
1) Place the headset on your head so the speaker covers your ear. The other end of the
headset should rest comfortably against the side of your head above your ear. Do not
place the end of the headband against the other ear.
2) The microphone arm swings over the top of the headset so you can
wear the headset on the left or right ear. Position the flexible arm
so the microphone is about 5 cm away from your mouth.
3) To use the headset, plug the headset cord into the 2.5mm jack on
the side of the handset.
[ 9 ]
HEADSET INSTALLATION (OPTIONAL)
DISPLAY AND ICONS
SUN 12:00A
Handset #1
New: 5 :OFF
Day of the week and time / battery icon
Handset ID and Banner
Number of new Caller ID calls received /
Ringer off icon (when the ringer is Off)
Example of the
standby mode display
ICON STATUS DESCRIPTION
Battery icons indicate the handset
Standby/ battery status. This icon cycles
Talk depending on the battery status
(full, medium, low, and empty).
Standby
Ringer off icon indicates that
ringer is turned off.
Talk
Mute icon appears when you mute
the handset.
:OFF
ICON STATUS DESCRIPTION
Talk
Speaker icon appears when the
handset speaker phone is used.
Talk
Booster icon appears when the
Clarity Booster feature is in use.
Talk
Privacy icon appears when the
Privacy Mode is turned on.
Talk
Recording icon appears while
recording a conversation.
R
B
UP354BH(WDECT2355+2) OM 5/14/04 10:49 AM Page 9