Filter
Top Products
[ 26 ]
MUTE MICROPHONE
With the handset
You can temporarily turn off the microphone so that the person you are talking with
cannot hear you.
1) Press /del during talk mode (while phone is in use).
2) Press /vol/ or /vol/ to move the pointer to Mute and then .
Mute On and appear in the display. To cancel muting, repeat above step again
when Mute is set to on, Mute Off appears.
With the base
While using the base speakerphone, press mute/find handset on the base to turn Off
the microphone. Press mute/find handset again or press to cancel muting.
DND allows you to mute the ringer of the handset and the base at once. Additionally, if
you have more than one handset, ringer for all handsets will be muted. To do this, in the
standby mode, press and hold do not disturb on the base. You will hear a confirmation
tone and the DND LED illuminates. To cancel, press do not disturb again. You can also
mute the ringer tone while the phone is ringing by pressing do not disturb on the base.
To mute the ringer tone for each handset or the base temporarily, when the phone is
ringing:
- Press on the handset, or
- Press play/stop on the base.
The ringer tone will return to the previous setting starting with the next incoming call.
DO NOT DISTURB (DND)
• Standby Mode - The
handset is not in use
and
has not been pressed.
• Setting the DND to
on while the
answering system is
off turns the
answering system on
automatically. The
answering system
returns to the
original setting when
you cancel the DND.
• If you press ans
on/ off when the
DND and the
answering system is
on, both of the DND
and the answering
system will turn off.
UP354BH(WDECT2355+2) OM 5/14/04 10:50 AM Page 26