Filter
Top Products
BASICS
This handset has a built-in speakerphone that allows you to have a hands-free
conversation. This feature allows you to communicate easily while performing other
tasks, such as cooking. appears during hands-free conversations.
You can easily switch a call from normal conversation to hands-free conversation.
To switch a call, press speaker during the call.
From the Handset From the Base
Normal conversation Hands-free conversation
To answer a call Handset On the Cradle Press
.
Pick up the handset (AutoTalk)
or pick up the handset and
press .
Handset Off the Cradle Handset Off the Cradle
Press any number key, Press speaker.
, or
(Any Key Answer), or press
.
To make a call Handset Off the Cradle Handset Off the Cradle
1) Press . 1) Press speaker. 1) Press
.
2) Listen for the dial tone. 2) Listen for the dial tone. 2) Listen for the
3) Dial the number. 3) Dial the number. dial tone.
OR OR 3) Dial the number.
Dial the number, and then Dial the number, and then
press . press speaker.
To hang up Press , or return the handset to the cradle (AutoStandby). Press .
To enter a pause When you dial the number, press redial/pause. Press . When
within the “P” appears in the display, which represents a pause. you dial the
number
dialing sequence
press redial/p.
[ 22 ]
MAKING AND RECEIVING CALLS
• To set Autotalk, see
page 16 or to set
Anykey Answer see
page 17.
• The handset
microphone is located
at the bottom of the
handset (see “Controls
and Functions” on
page 1). Position
yourself as near to the
handset as possible
and speak clearly.
• If the line is in use by
another handset(s),
Line In Use
appears in the display
of all registered
handset’s display, that
are not in use.
• The base microphone
is located under the
base (see "Controls
and Functions" on
page 1). Position
yourself as near to the
base as possible.
UP354BH(WDECT2355+2) OM 5/14/04 10:50 AM Page 22