Filter
Top Products
8.10.2 Numbers Only
Some menu items require you to input numbers only. In such menu items, you can use the DTMF
keys in the dial pad to input numbers in the same way described in the previous section. Only
exception is that each DTMF key is assigned an integer number 0~9, *, or # only, and no additional
characters like alphabet letters.
Also press the REDIAL button for a Pause input, and the FLASH button for a Flash input.
Let’s try entering “4466P!000#”.
FONT
#*0987654321
1
#*0987654321
Dial Pad
Step 1. For “4” : 4
Step 2. For “4” : 4
Step 3. For “6” : 6
Step 4. For “6” : 6
Step 5. For “P” : REDIAL (Press the REDIAL button for a Pause input )
Step 6. For “!” : FLASH (Press the FLASH button for a Flash input )
Step 7. For “0” : 0
Step 8. For “0” : 0
Step 9. For “0” : 0
Step 10. For “#” : #
Note: 1. The character assignment for the DTMF * key and DTMF # key many vary
depending on the menu items. When entering IP address for GateKeeper, the DTMF
“ * “ key is used for “.”, and the DTMF “ # " key is not assigned any character at all.
2. A pause input is displayed as “ P ” while a flash input is displayed as “ ! ” on the
screen.
Page 23