Filter
Top Products
8.4 Muting a call
During a call, you can mute the handset, headset or speakerphone by pressing the MUTE button
to prevent another party from hearing what you or someone else in the room is saying
(The MUTE LED will light up indicating the mute function is enabled. )
To disable the mute function, press the MUTE button again.
Note: (When using Multi-line service) Pressing the MUTE button will mute Lines 1 and 2
when both are active.
8.5 Redialing the last number dialed
To redial the most recently dialed number, lift the handset and press the Redial button.
For use with the speakerphone, just press the REDIAL button.
Note: (When using Multi-line service) The Redial button will redial the most recently
dialed number regardless of whether it was dialed on Line 1 or Line 2.
8.6 Holding a call
There are two ways to place the current line on hold in the multi-line phone.
Let’s say both LINE1 and LINE2 are registered and you were talking on LINE1.
1) Using the FLASH button
If you press the FLASH button while you are talking, LINE 1 is placed on hold. The person on
the other end of the line will hear the hold melody and you will hear dial tone indicating it is
ready to make a new call.
Note: If you hear no dial tone after the line was placed on hold by pressing the FLASH
button, please consult with your network administrator.
2) Using LINE1 and LINE2 buttons
If you press LINE 2 button while you were talking on LINE 1, LINE 1 will be placed on hold and
the person on the other end of the line will hear no sound at all.
Page 19