Filter
Top Products
61
5. Press .Clr (or scroll to Back and press Pgm/E to save and
return to the Close Call menu.
Close Call Alert
This setting controls the Alert Beep and Alert Light settings used
during Close Call operation. (Default = On for both)
1. Press Func then Hold to view the Close Call menu.
2. Scroll to Close Call Alert and press Pgm/E. Select from the
following options:
• Alert Beep - Controls whether the scanner sounds an
alert beep when Close Call detects a signal.
• Alert Light - Controls whether the scanner ashes the
display backlight when Close Call detects a signal.
• Back - returns to previous menu.
3. Scroll to any option you want to enable/disable and press
Pgm/E.
4. Scroll to On or Off and press Pgm/E
5. Press .Clr (or scroll to Back and press Pgm/E) to save and
return to the Close Call menu.
Close Call Hits Bank
The scanner saves the last 10 Close Call hits into the Close Call
temporary store bank named “Close Call Hits.”
This setting turns the bank on or o during Scan mode. (Default
= O)
1. Press Func then Hold to view the Close Call menu.
2. Scroll to Scan Hits and press Pgm/E.