Filter
Top Products
37
• Set any setting
When you connect your scanner to your PC, a series of screens
will appear to assist you.
USB drivers and programming software are available for
download from http://info.uniden.com/UnidenMan4/BC125AT.
PROGRAMMING CHANNELS
Now that you have congured your scanner, you are ready to
start using your scanner’s preprogrammed service banks, the
custom search banks, the Close Call feature, or the Weather
Scan/Alert feature. You can also program your channel
memories or re-program your 10 custom search bank memories.
Before the scanner can begin scanning, you must program a
frequency into at least one channel.
1. To select a channel, press Hold then enter the channel
number (1-500).
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
Note 1: Turning SCROLL CONTROL in Function mode will
allow you to select the rst channel in each bank.
Note 2: You can quickly store frequencies in Scan Hold mode
by entering the frequency and pressing Pgm/E.
3. Scroll to highlight Enter Frequency and press Pgm/E. You
will see the channel number and currently programmed
frequency. (To return to the previous screen, press . Clr.)