Filter
Top Products
58
Close Call works better with some types of transmissions than
others. It might not correctly display frequency information
for transmitters using a highly directive antenna (such as an
amateur radio beam antenna), if there are many transmitters
operating at the same time in the same area, or if the transmitter
is a broadcast television station.
Selecting Close Call Modes
1. In Scan or Search mode press Func then Hold to enter the
Close Call Menu.
2. Scroll to Close Call Mode and press Pgm/E.
3. Turn SCROLL CONTROL and select from the following
modes:
• Close Call O - turns o Close Call.
• Close Call DND - only checks for Close Call hits between
transmissions avoiding breaks in current transmiss
• Close Call Pri (Priority) - checks for Close Call hits every 2
seconds, even during transmissions.
• Close Call Only - performs continuous Close Call checks
until you exit by pressing Scan or Srch/Svc.
• < Back - returns to previous menu.
4. Press Pgm/E to select and return to the Close Call menu.
If Close Call DND or Close Call Pri is selected, the Close Call icon
will display in Scan and Search modes.
Close Call Only Mode
In Close Call Only mode, the rst line displays Close Call, CC
Search scrolls from the right to the left on the second line, and
the Close Call icon blinks in the display.