Filter
Top Products
45
P
appears in the display if it is a priority channel. The
modulation, Priority mode icon (if Priority is enabled), and the
Close Call icon (if CC Pri or CC-DND is enabled) also displays.
Any CTCSS/DCS received blinks in CTCSS/DCS search and
appears solid if programmed.
Numbers at the bottom of the display show the selected scan
banks. The currently scanned bank number ashes in Receive
mode.
• To temporarily lock out a channel, press L/O.
• To permanently lock out a channel, press L/O twice quickly.
See Locking Out Channels on page 46.
Priority Scan Modes
This scanner allows four dierent Priority modes. These modes
also function in Search and Hold modes (except Close Call
Only mode and Weather modes). (Default = O)
In Scan or Search mode, press Func then Pri/1 to view the
Priority menu.
Scroll to highlight one of the following option and then press
Pgm/E to select it:
• Priority Off - does not check for priority channels.
• Priority DND - checks Priority channels every 2 seconds
only when not receiving. If you set Priority mode to Priority
DND, the scanner turns on the PRI icon during scanning or
searching.