Filter
Top Products
12
Three Power Options - let you power the scanner using the
included two AA rechargeable or alkaline batteries or the
supplied USB cable.
Built-In Charger - allows you to charge Ni-MH batteries in the
scanner using a USB port on any computer and the supplied
USB cable.
Key Conrmation Tones - You can turn on/o a tone that
sounds when you perform an operation correctly or if you make
an error.
Key Lock - lets you lock the scanner's keys to help prevent
accidental changes to the scanner's programming.
Battery Save - works when there is no transmission for 1 minute
in Scan Hold mode and any Search Hold mode (without
Priority Scan). This feature turns o RF power for 1 second and
turns on it for 300ms to extend the battery life.
Battery Low Alert - the
BATT
icon will blink in the display and a
tone warns you every 15 seconds when the battery power gets
low.
FREQUENCY RANGE
This table lists the frequency ranges, frequency steps, default
modulation, and type of transmissions you can hear for each
range.