Filter
Top Products
49
While monitoring a transmission, the upper line displays the
current service bank name and the lower line displays the
channel name (if dened) and current frequency with the
direction indicator (↑or ↓).
The modulation, Priority mode icon (if Priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC
Pri or CC-DND is enabled) will also appear in the display.
Numbers at the bottom of the display show the enabled service
search banks. The currently searched bank number ashes in
Receive mode.
To store a frequency, press Pgm/E. (see Storing Found Search
Frequencies on page 55.)
To temporarily lock out a frequency, press L/O.
To permanently lock out a frequency, press L/O twice quickly.
See also Search Options on page 53 for Delay, CTCSS/DCS settings,
and locking out/reviewing/unlocking frequencies.
Custom Search Mode
Custom Search mode lets you program and search 10
custom search ranges. You can search any of these ranges
simultaneously and reprogram each custom search range.
During custom search, the scanner searches starting with the
lowest frequency in the search range you select to the highest
frequency in the range.
This feature lets you search through the preset frequency
ranges. (See also Programming Custom Search Ranges, page 54).
The preset frequency ranges are: