Filter
Top Products
54
CTCSS/DCS Search
This setting controls whether the scanner will search for a
subaudible tone when it stops on a transmission during a
Service Search. (Default = On)
1. Press Func then Pgm/E in any Service, Custom, or Quick
Search/Search Hold mode to view the Search menu.
2. Turn SCROLL CONTROL to CTCSS/DCS Search and
press Pgm/E.
3. Turn SCROLL CONTROL to select one of the following
settings:
• Search O
• Search On
4. Press Pgm/E to save and return to previous menu.
Programming Custom Search Ranges
You can dene each search range used during a Custom Search.
1. Press Func then Pgm/E in Custom Search mode to view
the Search menu.
2. Turn SCROLL CONTROL to Program Limits and press
Pgm/E.
3. Turn SCROLL CONTROL to Search Bank 1-10 and press
Pgm/E. You will see the previously programmed lower
frequency. At Lower, press Pgm/E and use the keypad to
enter the lower limit frequency then press Pgm/E.
4. Scroll to Upper and press Pgm/E. You will see the
previously programmed upper frequency. Use the keypad
to enter the upper limit frequency then press Pgm/E.