Filter
Top Products
53
• To permanently lock out a frequency, press L/O twice
quickly.
• To exit Quick Search, press Scan.
See also Search Options on page 53 for Delay, CTCSS/DCS settings,
and locking out/reviewing/unlocking frequencies.
Search Options
Search Delay
This setting controls how many seconds the scanner waits after
a transmission ends before resuming searching. If you select a
minus delay time, the scanner stops on the transmission for the
setting time and then automatically resumes scanning. (Default
= 2 seconds)
1. Press Func then Pgm/E in Service, Custom, or Quick
Search/Search Hold mode to view the Search menu.
2. Scroll to Set Delay and press Pgm/E.
3. Turn SCROLL CONTROL to select the delay time from the
following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
4. Press Pgm/E to save and return to previous menu.