Filter
Top Products
Features
Message Waiting
66 Strata DKT2004-CT Cordless Digital Telephone 9/00
[PhDN/MW] Message Waiting
To use this feature, your telephone must be programmed for both [PhDNs] and
Message Waiting (
0:) buttons.
Your telephone has one built-in Message Waiting (
0VJ) button that works with your
[PDN] (see Message Waiting for a detailed explanation of this feature.).
➤ To set a Message Waiting indication for a [PhDN/MW]
➤ Follow the same procedure used to set a message light on another telephone.
➤ To respond to [PhDN/MW]
➤ To cancel Message Waiting set on a [PhDN/MW]
A flashing
[PhDN/MW] indicates that there is a message waiting on that button;
however, if you have listened to that message (which should turn the LED off) or if for
some reason you wish to turn it off, you can follow the steps below to turn it off.
1. Press the [PhDN/MW]
indicated by the flashing
red LED.
...or answer a message by
pressing
7$/..If there is
no answer, hang up and try
at a later time.
Your telephone rings the station or voice mail
device that left the message. (The LED on your
telephone continues to flash.)
2. Press
7$/. after
receiving the message.
If you have more than one message waiting
indication from different sources, the red LED
continues to flash, after you answer the first
message.
3. Repeat Steps 1 and 2 to
answer the next messages.
1. Press the [PhDN]
associated with the
flashing.
You hear a steady dial tone and the[PhDN] LED
lights steady.
2. Enter
. The dial tone stops.