Filter
Top Products
Features
Message Waiting
64 Strata DKT2004-CT Cordless Digital Telephone 9/00
Message Waiting
If you call a station [DN] and it is busy or its user does not answer, you can leave a
message waiting indication by pressing the
0VJ button. The Msg LED at the called
station flashes after you press the button. The user can call you back by pushing the
0VJ button with the flashing LED. (Voice mail devices, as well as people, can leave
message waiting indications.)
All telephones have a fixed
0VJ button/LED for receiving/retrieving messages left by
callers that called the [PDN]. Telephones that own [PhDNs] can also have flexible
message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving messages left by
callers.
Each Message Waiting indication can accept up to four MW indications at each [DN]
or [PhDN] at one time. One of the indications for each [DN] is reserved for the
Message Center set in system programming.
➤ To answer a Message Waiting
The called party must answer—by either going off-hook or by pressing the
6SNU
button—for the indication to be cancelled automatically.
➤ To cancel Message Waiting
1. Press
0VJ when the Msg
LED is flashing red. If
there is no answer, hang up
and try at a later time.
Your telephone rings the station or voice mail
device that set the indication. If there is no
answer, the LED continues to flash.
2. Press
7$/. after
receiving the message to
terminate the call.
Voice mail devices may cancel the indication after
a short delay.
3. Repeat the Steps to retrieve
additional messages.
The Msg LED flashes if you have more messages.
➤ Press 0VJ to answer The Msgindication is cancelled when the called
party answers.