Filter
Top Products
Features
Quick Reference
Strata DKT2004-CT Cordless Digital Telephone 9/00 39
➤ To use Automatic Hold
➤ To switch between calls
Calling the Attendant Console
There are three ways to call the Attendant Console depending upon system
programming. You can call any Attendant Console, a particular Attendant Console, or
all Attendant Consoles.
➤ To call any console
➤ To call a specific console
➤ To make an emergency call to all consoles
➤ Press another /LQH or
[DN] to receive or
originate a new call, while
on one call.
The original Line or [DN] LED flashes at the on-
hold rate and the original call is placed on hold.
The LED of the new call lights steady and the
new line is accessed.
➤ Press /LQH or [DN] of the
held call.
The Line or [DN] LED just placed on hold
flashes at the on-hold rate, and the LED of the
Line just accessed lights steady.
➤ Press a [DN] + . The call rings the Attendant Console. Dial 0 calls
rotate between the consoles if more than one
console is installed.
➤ Press a [DN] + the
console’s [DN] ______.
The call rings the console’s Incoming [DN] (,Q
'1
) button.
Note Your System Administrator can provide
the Attendant Console Incoming [DNs].
➤ Press [DN] + the
emergency access code
.
The call rings all consoles (
(PJU button).