Filter
Top Products
Features
Account Code Calls
40 Strata DKT2004-CT Cordless Digital Telephone 9/00
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls using rotary dial pulses
on outside lines. To access remote equipment (such as an answering machine)
requiring Dual-tone Multi-frequency (DTMF) tones while on these lines, you must set
your telephone for tone dialing after you have dialed the telephone number. Your
telephone must have a
7RQH'LDO6HOHFW button assigned in system programming to
access this feature.
➤ To change to Tone Dialing
Note When originating or receiving a new call, the system automatically places the
line in the dial pulse mode.
Account Code Calls
Account Codes can be entered before or after a call. Some of the code applications
include billing, tracking, and line restriction. Account Codes are recorded by the
system and can, along with the details of the calls they are associated with, be printed
out on a Station Message Detail Recording (SMDR) report.
Forced Account Codes
Some applications may require that you enter a Forced Account Code before dialing
the telephone number.
1. Dial a telephone
number on a line
programmed for rotary
dial pulses.
Although the line is programmed for rotary dial
pulses, you can access the line and dial the telephone
number like any other call described in this guide.
2. Press
7RQH'LDO
6HOHFW
while the call
is in progress.
The Tone Dial Select LED lights steady, and you can
send DTMF tones with your dial pad. If the LED is
off, tone dialing is not selected, and you cannot send
DTMF tones.