Features
Alarm Reset
42 Strata DKT2004-CT Cordless Digital Telephone 9/00
Verified Account Codes
If the system is set for Verified Account Codes, you must enter specific codes when
entering Forced or Voluntary Account Codes. Verified Account Codes are established
in system programming or by designated stations.
Alarm Reset
Your Strata DK system can be connected to a facility alarm system. All telephones
produce a startling tone whenever this alarm is activated. Stations with an
$ODUP
5HVHW
button can reset the alarm by pressing the$ODU P5HVHWbutton.
Alert Signaling
Alert Signaling enables you to send an alert sound to a predesignated (partner) station
by pressing a single button. This feature is based on the “buzz” key, where, for
example, a manager might alert his/her administrative assistant to enter the office.
You can have as many as four
$OHUW6LJQDO(s) to send or receive an Alert Signal to/
from other telephones. An Alert Signal is sent even if the alerted telephone is busy
(on/off-hook) or in the DND or Call Forward mode.
...or
6SHHG'LDO+
...or
+ .
2. Enter the Account Code. You hear confirmation tone (one-half second
duration) if the code is valid. If the code is
invalid, you hear two short tones.
3. Repeat Steps 1 and 2 to
enter another account code
(the last code entered is
recorded).
Notes
● Any digits dialed after the code has been
entered are treated as part of the outside
telephone number.
● Voluntary Account Codes must be entered
before the call is disconnected.