Filter
Top Products
Features
Quick Reference
Strata DKT2004-CT Cordless Digital Telephone 9/00 37
Placing/Retrieving Calls on Hold
Calls on hold may be released automatically if the held party hangs up and the
network provides a hold-release signal. See Page 38 for the Automatic Hold feature.
➤ To hold a call that appears on a Line or [DN] button
➤ To place a Handsfree Answerback call on hold
2. Dial the [DN] of the
station to be added.
If you receive a busy tone or no answer, press
&QI7UQ to return to the original connection.
3. Press
&QI7UQ after the
party answers.
All parties are conferenced. The [DN] or Line
LED lights steady.
Up to three stations (including your own) can
conference with one line.
The new station is not conferenced until you
answer by lifting the handset or pressing a
[DN].
➤ Press +ROG. The Line or [DN] LED flashes green at the on-
hold rate.
You hear recall tone when your station is idle (or
two times only when busy) if you do not retrieve
the held call before “Hold the recall” time set in
system programming expires.
1. Press
7$/.or the
flashing [DN] to answer
the call.
You are connected to the incoming call.
2. Press
+ROG. The Line or [DN] LED flashes green at the on-
hold rate.
You hear recall tone when your station is idle (or
two times only when busy) if you do not retrieve
the held call before “Hold the recall” time set in
system programming expires.