Filter
Top Products
Features
Call Forward
Strata DKT2004-CT Cordless Digital Telephone 9/00 47
Telephones can have many [DN] buttons, but the telephone must be the designated
owner of a [DN] before you can Call Forward to the [DN]. Each telephone is usually
the owner of at least one [DN] which is called the Primary Directory Number [PDN].
Your telephone can be programmed to have [PhDNs] in addition to [DNs]. Each
[PhDN] can be set to any mode of Call Forward independent of other [DNs] on the
telephone. Like the [DNs], your telephone must be the owner of [PhDNs], so that you
can use any of call forward features. If you hear re-order tone when following any of
the Call Forward steps, then your telephone is not the owner of the selected [PhDN].
When you forward calls to another destination, you see a message indicating the:
♦ Type of Call forward.
♦ Forwarded from [PhDN] and/or [DN].
♦ Forwarded to destination number.
Note Call Forward–All Calls, Call Forward–No Answer, and Call Forward–Busy
can only be activated when Speed Dial is assigned to an “
)-)” function
key or deleted from all buttons (use
). See “Access Codes” on Page 90.
Call Forward-All Calls
If your station is idle or busy and has this feature activated, all calls to it are forwarded
immediately. The station does not ring.
➤ To set Call Forward-All Calls
1. Press
&DOO)UZG$OO
&DOOV
The Call Frwd All Calls LED flashes.
...or press a [PDN] or
[PhDN] +
.
You hear a confirmation tone.
Note [PhDNs] can only be forwarded by using
the dial codes.
2. Enter the [DN] to which
calls are forwarded.