Filter
Top Products
Strata DKT2004-CT Cordless Digital Telephone 9/00 7
Installation 2
Important! Your telephone system must be programmed for Auto Preference for
your
7$/. button to work. If there is a shared digital telephone, you
receive internal system dial tone automatically after picking up the
handset of your deskset. For example, in a DK424 system, Program 32
must have a setting other than “00.” It is best to set Auto Line
Preference to access Intercom dial tone.
Step 1: Select Location
1. Select a location for your cordless digital telephone. Avoid excessive heat or
humidity.
2. Place the cordless digital telephone’s base unit on a desk or tabletop near a
standard 120V AC outlet and within reach of the digital telephone line connection
to your Strata DK system.
3. Keep the base unit and handset away from sources of electrical noise (motors,
fluorescent lighting, etc.).
Important! Place the cordless telephone to the right of the DKT. If placed on the
left of the DKT, the cordless antenna picks up a tone due to its close
proximity to the DKT speaker and electronic parts.