Features
Call Forward
Strata DKT2004-CT Cordless Digital Telephone 9/00 51
Call Forward-External
This feature enables you to forward new incoming calls directed to your [PDN] to a
destination outside of the system. [PhDNs] assigned to your telephone do not Call
Forward to external destinations. Internal calls and transferred calls to your [PDN]
also do not forward to external destinations. Only incoming calls over CO Lines
dedicated to your [PDN], private CO Line, and/or Direct In Dial line calls are
forwarded. The Call Forward-External destination can be a telephone number over a
CO Line, a station over a tie line, or a station within your Strata DK system.
Any of the Call Forward modes can be set for your [PDNs] or [PhDNs]
simultaneously with Call Forward-External. This feature stores the calls to Station
Speed Dial Code 49. Use the Speed Dial storage procedures detailed in this chapter.
When forwarding to an outside destination include the CO Line (or CO Line Group)
access code before the telephone number. See Table 1 on page 94 for the CO Line/
Line Group access codes. The LCR access code “9” cannot be used.
Important! Only perform the following procedure the first time Call Forward
External is set or when you change the destination. It is not necessary
to store the destination each time you set Call Forward External; it
remains in system memory.
➤ To set Call Forward-External
1. Press
&DOO)UZG
([WHUQDO
Incoming calls
forward to the
destination stored at
Station Speed Dial
Location 49
(RCTUA, B, C/D
processors) or
location 139 (RCTUE/F processors).
...or press the [PDN] +
+ 7$/..
CF-EKT
1201
CF-EKT
1201