Filter
Top Products
Features
Quick Reference
Strata DKT2004-CT Cordless Digital Telephone 9/00 35
➤ To transfer a call (using Camp-on)
1. Press&QI7UQ. The Line or [DN] LED flashes at the conference
rate. You hear internal dial tone.
2. Dial the [DN] where the
call is to be transferred.
The [DN] could be the
[DN] of a telephone, a
Hunt Group Number, or ACD Group
[DN], etc.
3. Announce the call. After dialing, you hear a single tone.
Note If the call was made with Tone Signaling
instead of Voice First Signaling, you hear
ringing tone.
If the called station does not answer, you receive
a recall ring (when your station or
[DN] is idle).
The ring is set by system programming.
4. Hang up The
Line LED changes to steady when the called
station connects with the transferred call.
...or press
/LQH, [DN] +
to reconnect to the
transferred line before the
call is answered or busy
tone is received.
The Line LED changes to steady red when the
called station connects with the transferred call.
After you hang up, the Line LED begins to flash
at the on-hold rate or if you transferred the call
from a
[DN], the [DN] LED goes out. The CO
Line or [DN] camps onto the called station and
the called station receives a warning tone.
You receive a recall ring when your station or
[DN]is idle and camp-on is cancelled when the
called station user fails to answer within a
predetermined time. Repeat the procedure if
necessary.